ZENEC ZE-MC194 Mode D'emploi page 21

DEVICE CONNECTIONS
control caBles
auto Brightness control
■ To avoid the display being too bright at night time, if the headlight cable is connected to
llluml, turning on the head light will dim the backlight of the TFT lCD and vice versa.
telephone mute
■ lf the muTE cable is connected to a car phone, other audio outputs mute when one call
is received by the car phone.
reverse driving
■ lf a rear view camera is connected with the unit, the playing source switches to CAmERA
automatically when you start reverse driving. with the reverse driving over, the playing
source switches to the previous source.
parKing BraKe
1. lf "PRk Sw" cable is connected to hand brake switch, video display on the TFT monitor
will be controlled by this function. Parking cable function ceases when the playing
source is CAmERA.
2. The monitor displays the blue screen with warning information to prevent the driver
watching video contents during driving, but the passengers at the rear seat can watch
video content normally, when headrest monitors are installed.
40
DEVICE CONNECTIONS
parKing BraKe caBle connections
reverse driving caBle connections
DEUTSCH
ENGL I SH
gearbox
41