Publicité
Les langues disponibles
Les langues disponibles
SETUP
3. Close the parental lock
■ Repeat the operation of the first step to enter a 6-digit password (old or new) and then
confirm.
■ The parental lock is closed.
■ load factory
To restore the default settings relating with DVD playback (e.g.: DVD Audio, DVD Subtitle),
press the [RESET] option.
hardWare
■ camera ln
normal: Actual scenes shot by the camera display on the TFT monitor while reverse
driving (just like what you are watching).
mirror: The mirror images of actual scenes display on the TFT monitor while reverse
driving (just like observing things over the rearview mirror).
■ tft auto open
Auto: The TFT panel automatically opens when the unit is turned on.
manual: when the ignition is turned off, the TFT panel remains open if it was opened
previously.
Off: The TFT panel opens only by pressing OPEn button when the unit is turned on.
■ video input
nTSC: Set the color system of the TFT screen to nTSC.
PAl: Set the color system of the TFT screen to PAl.
AuTO: Set the color system of the TFT screen automatically by the unit according to the
input video formats.
■ parking
On: image displays only after your car has been parked.
Off: image displays at all times.
p.vol
■ P.VOl means Programmable Volume.
you can balance the volume among different audio sources using this function.
34
SETUP
■ source
Select one playing source that you want to set relative volume.
■ level
you can set relative volume level from 0 to 6.
method of changing passWort
1. locate the cursor on the "Anti-PSw" option, press the numeric keys on the remote control
or touch the "Anti-PSw" option directly to open the onscreen keypad. Touch the numeric
buttons to enter the factory default code "012345" to deactivate the anti theft function.
2. Repeat the operation above to enter a new 6 digit password and confirm by pressing the
enter button. your new personal password becomes effective and the unit will be locked
when disconnected from power.
please note:
■ Do use a code you can easily remember. unlock the unit is not free of charge and can
only be done by an authorized ZEnEC service center.
ts cal
■ when the touch function is not sensitive or valid, you should calibrate the touch screen
by this function.
■ Calibrate the touch screen just following the screen introductions after entering the TS
CAl mode.
DEUTSCH
ENGL I SH
35
Publicité
