Ickle Bubba Eclipse Travel System Mode D'emploi page 14

Step 4: Canopy Installation
a. Attach the canopy connector
clips on either side of the hood to
the seat frame, positioning over
the pin shown in the image. Once
in position, clip into place.
Step 5: Fitting Carrycot to Frame
a. Press the circular buttons on ei-
ther side of the frame, and adjust
the adapter to a vertical position.
All manuals and user guides at all-guides.com
Carrycot Set Up
b. Secure the canopy to the frame
using the zip.
b. Line up the adapters with the
pushchair frame and push down
until you hear a click.
To remove, press the lowest but-
ton on the adapter inwards, and
lift off the frame.