Ickle Bubba Eclipse Travel System Mode D'emploi page 11

Step 5: Rear Wheel Installation
a. Fit the rear wheel into the hole
located in the rear wheel housing,
located on the back of the pram
frame.
Step 6: Removing the Rear Wheels
a. Pull the button located at the
rear of the wheel housing, shown
in the image above, outwards.
All manuals and user guides at all-guides.com
Set Up & Assembly
b. Repeat on the other side, and
ensure both wheels are locked in
place before use.
b. Pull the wheel away from the
housing to remove.