Télécharger Imprimer la page

RCA 25250 Mode D'emploi page 42

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Other Information
Display Messages
The following messages show the status of the phone, provides Caller ID
information, or helps you set up and use your phone.
DELETE ALL?
Prompt asking if you want to erase all records.
DELETE?
Prompt asking if you want to erase the current record.
END/ START
Indicates that it is the end of the list.
ENTER NAME
Prompt telling you to enter a name.
ENTER NUMBER
Prompt telling you to enter a telephone number.
NEW CALLS
Indicates call or calls which have not been reviewed.
HANDSET NAME
Prompt telling you to enter a user name for the hand
set.
UNAVAILABLE
Indicates that the function you want to initialize
cannot work at that moment or the function being
worked cannot continue. The system is busy or some
other higher priority function is being performed.
For example, the message playback function will be
stopped when there is an incoming call.
NO LINE
Indicates that the telephone line is not connected.
LINE IN USE
Display on handset while the line is in use.
EMPTY
Indicates there are no CID records in memory.
OUT OF RANGE
Indicates handset is too far away from the base, and
the handset is searching for the base.
BLOCKED
Indicates the person is calling from a number which is
blocked from transmission.
UNKNOWN
Indicates incoming call is from an area not serviced by
CID or the CID information was not sent.
Handset Sound Signals
Signal
A long warbling tone (with ringer on)
Two short beeps (several times)
One beep every 14 seconds
One long beep after press one key
A short warbling tone (with ringer on)
2
Meaning
Signals an incoming call
Page signal
Low battery warning
Confirm
Error

Publicité

loading