Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Making Calls with the Optional Headset
1. Plug the headset into the Headset jack on the side of the base or side of
the cordless handset.
2. Adjust the headset to rest comfortably on top of your head or over
your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. For the base, press the Headset button on base and the phone
automatically selects first available, if both lines are available, Line 1
will be used.
5. For the cordless handset, press the Talk button.
6. Wait for a dial tone, and then dial the phone number.
7. Press Headset button (on base) or End button (on handset) when
finished.
CAUTION: Use only Thomson Inc. 5-2425 headset that is compatible
with this unit.
NOTE: If the headset is not connected (or if not completely inserted into
headset jack), an error tone is heard when the Headset button is pressed.
Pre-dialing
1. With the phone idle, manually enter the telephone number. The
telephone number shows in the display.
2. Press the DIAL soft key (on base only), Speaker button, Talk button
(handset only), or Line 1 or Line 2 button to take a line, and then the
telephone number will be dialed out.
Answering a Call
For cordless handset:
1. Press the Talk button to answer the call in receiver mode,
-OR-
2. Press the Spk button to answer the call in speakerphone mode,
-OR-
3. Press the corresponding LINE soft key to answer the call in receiver
mode.
4. When finished, press END button.
Telephone Operation
25
Publicité
