RCA 25250 Mode D'emploi page 22

All manuals and user guides at all-guides.com
Programming the Telephone
Set After Hours
This will allow you to program the start time for the after work hour.
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the Set After Hours.
2. Press SELECT soft key.
3. Use the touch-tone pad to set the time, and use AM/PM soft key to
select AM or PM.
4. Press the SELECT soft key to save the time.
5. Use the VOL (- or +) button to select Yes or No for Announce Only.
6. Press the SELECT soft key to save your selection and "Saved" shows in
the display.
NOTE: If you select Yes for Announce Only, the unit will hang up the call after
announcing the greeting when answering the call is in answering mode.
Example:
a) Set the Work Hours start at 9:00am, and "Announce Only" as NO.
b) Set the After Hours start at 5:00pm, and "Announce Only" as NO.
c) Select "Timed" while setting the OGA.
When the call comes in within 9:00am to 5:00pm, the Work Hours OGA
will be announced to the caller.
When the call comes in after 5:00pm up to 9:00am, the After Hours
OGA will be announced to the caller.
On Saturdays and Sundays, the unit will announce After Hours OGA.
Ring Delay
This feature lets you select the number of times you want the phone to ring
before the answering system answers a call.
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the Ring Delay.
2. Press SELECT soft key.
3. Use the VOL (- or +) button to scroll to your selection, from 2 rings to 6
rings or toll saver, and use the DIR or CID button to toggle between L1
and L 2.
4. Press the SELECT soft key to save your selection and "Saved" shows in
the display.
NOTE: When the Toll saver is selected, the unit will answer the incoming call
after 3 rings if there is new message. Otherwise, the unit will answer the
incoming call after 5 rings.
22