Setting Up The Unit - NORAUTO ENDURO Mode D'emploi

SETTING UP THE UNIT

Ensure that all installation and operating instructions and safety precautions are understood and
carefully followed by anyone installing or using the Charger.
Follow the steps outlined in the "SAFETY PRECAUTIONS" section of this manual.
When using this charger in proximity to the car's battery and engine, stand the charger on a flat, stable
surface and be sure to keep all clamps, eyelets, cords, clothing and body parts away from moving
parts of the car. Keep enough space around the appliance for allowing adequate ventilation.
Incorrect connection, battery short circuit, location of battery and location of the battery charger may
create a hazard. Make sure that adequate preparation has been made before proceeding.
OPERATING INSTRUCTIONS
IMPORTANT: ALWAYS disconnect the AC power cord from the AC power outlet before
connecting (or disconnecting) the charger to (or from) the battery.
IMPORTANT: This power system is to be used ONLY on cars with 6V DC or 12V DC
battery system. Do NOT connect to a 24V DC battery system.
IMPORTANT: Never alter the AC cord or plug. If it will not fit, have a proper outlet installed
by a qualified electrician. Improper connection may result in an electric shock. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
115