Publicité
Les langues disponibles
Les langues disponibles
2.
correcT use
incorrect use of the electromotive rotary actuator can be dan-
gerous to people, nearby equipment and the environment.
•
The rotary actuator can be used indoors, e.g. to actuate fittings,
especially ball valves or shut-off flaps.
•
During use observe the permitted data, the operating conditions
and conditions of use specified in the contract documents and
operating instructions, as described in chapter 6.Technical data.
•
The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert (e.g. ATEX - Approved components).
•
Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and
problem-free operation.
•
Use the device only as intended.
2.1.
restrictions
If exporting the system/device, observe any existing restrictions.
6
All manuals and user guides at all-guides.com
english
Type 3004
Correctuse
2.2.
Possible errors in use
•
Do not put any loads on the housing (e.g. by placing objects on it
or standing on it).
•
Do not make any external modifications to the device housings.
not paint the housing parts or screws.
•
It is forbidden to open the housing for specific device designs in
the explosion-protected area. Follow the safety instructions on the
rating plate.
•
Do not install the actuator with the cover facing down (head first).
Do
Publicité
