Burkert 3004 Guide Rapide page 33

Control signal when current 4 – 20 ma (preset)
→
Press <MEM> and <CLOSE> push-
button and switch on the card (hold
down push-button).
The RED LED lights up 3x.
R
→
Release <MEM> and <CLOSE>
push-button and disconnect the card
from the power supply.
learning mode
specify end positions
G R
R
All manuals and user guides at all-guides.com
Type 3004
Installation
→
Press <OPEN> and <CLOSE>
push-button and switch on the
card (hold down push-button).
The RED and the GREEN LEDs light
up.
→
Release <OPEN> and
<CLOSE> push-button.
Both LEDs go out.
Learning mode is selected.
→
Press <CLOSE> push-button to
move the shut-off valve into the
closed position.
The RED LED lights up.
specify end positions
R
G
G
8.3.3. normal operation
Display normal operation
→
Switch on card.
The GREEN LED lights up 3x to indicate that the
G
start process has been implemented correctly.
english
→
Press <MEM> and <CLOSE>
push-button to save the closed
position.
The RED LED lights up 3x.
→
Press <OPEN> push-button to
move the shut-off valve into the
open position.
The GREEN LED lights up.
→
Press <MEM> and <OPEN>
push-button to save the open
position.
The GREEN LED lights up 3x.
All positions are now saved.
→
Disconnect the card from the
power supply.
27