Publicité
Les langues disponibles
Les langues disponibles
adjusting cams for limit switch contacts
Cam
Key
Adjustment travel
Fig. 14:
Adjusting limit switch
clockwise
Procedure:
→
Adjust the two upper cams with a suitable key.
→
On completion of the adjustment work, re-attach the hood 3, the
position indicator, the seal and the glass hood 1.
The rotary actuator is supplied ex works with the following
settings:
•
The limit switch CLOSED (FCF) is actuated by the cam
(closed position).
•
The limit switch OPEN (FCO) is preset to a rotation angle
of 90°.
20
All manuals and user guides at all-guides.com
Cam
Key
Adjustment travel
Fig. 15:
Adjusting limit switch
anti-clockwise
english
Type 3004
Installation
8.
insTallaTion
8.1.
safety instructions
Warning!
Danger - improper installation!
Improper installation may result in injuries as well as damage to
the device and the area around it.
•
Fluid and electrical installations may be carried out by autho-
rised technicians only and with the appropriate tools!
Danger due to unintentional activation of the equipment!
Unintentional activation of the equipment during installation work
may result in injuries and/or damage.
•
Take appropriate measures to prevent the equipment from being
unintentionally activated.
8.2.
electrical installation
DangEr!
risk of electric shock!
There is a serious risk of injury when reaching into the device.
•
Before starting work, always switch off the power supply and
safeguard to prevent re-activation!
•
Observe applicable accident prevention and safety regulations
for electrical equipment!
•
Attach earthing cable via the earthing screw!
Publicité
