It can be combined with the following components:
•
Stainless steel ball valve with two-part housing (Type 2651)
•
Stainless steel ball valve with three-part housing (Type 2654)
•
Plastic ball valve (Type 2657)
•
Metal flap valve (Type 2671)
•
Plastic flap valve (Type 2674)
The actuator direction cannot be reversed in the same operating
process. The rotary actuator does not reverse automatically.
Mechanical operation, without switching over the motor, is also pos-
sible via the handwheel on the rotary actuator. In electrical mode the
handwheel is not rotated with the actuator.
5.3.
options
•
Three-position rotary actuator (180°)
•
Rotation angle 180° or 270°
•
Rotary actuator with feedback potentiometer
- Potentiometer with resistance values 100 W, 1 KW, 5 KW
or 10 KW
- Analogue feedback via 4 – 20 mA signal
•
Rotary actuator with integrated emergency reset
•
2 additional limit switches
•
Heating resistor 10 W
10
All manuals and user guides at all-guides.com
english
Type 3004
SystemDescription
5.4.
exploded views
5.4.1.
motor 25 - 75 nm
Fig. 1:
Exploded views of motor 25 - 75 Nm