Publicité
Les langues disponibles
Les langues disponibles
trans-
jumper k1
feedback
ducer
0 - 10 V
0 - 10 V
ON
0 - 10 V
0 - 20 ma
ON
0 - 10 V
4 - 20 ma
ON
0 - 20 ma
0 - 10 V
OFF
0 - 20 ma
0 - 20 ma
OFF
0 - 20 ma
4 - 20 ma
OFF
4 - 20 ma
0 - 10 V
OFF
4 - 20 ma
0 - 20 ma
OFF
4 - 20 ma
4 - 20 ma
OFF
8.3.2.
Parameterization steps
specify direction of rotation of the shut-off valve
normal direction of rotation (preset)
→
Press <OPEN> push-button and switch on
the card (hold down push-button).
The GREEN LED lights up.
G
→
Release <OPEN> push-button and dis-
connect the card from the power supply.
26
All manuals and user guides at all-guides.com
Plug-in
Plug-in
Plug-in
jumper k2
jumper
a
b
a
b
OFF
ON
OFF
OFF OFF
ON
OFF OFF
ON
ON
ON
OFF
ON
OFF
ON
ON
OFF
ON
ON
ON
OFF
ON
OFF
ON
ON
OFF
ON
english
reverse direction of rotation
k3
OFF
R
OFF
ON
specify control signal type
OFF
Control signal when voltage 0 – 10 V
OFF
ON
OFF
R
OFF
ON
Control signal when current 0 – 20 ma
Type 3004
Installation
→
Press <CLOSE> push-button and switch on
the card (hold down push-button).
The RED LED lights up.
→
Release <CLOSE> push-button and dis-
connect the card from the power supply.
→
Press <MEM> push-button and switch on the
card (hold down push-button).
The RED LED lights up 3x.
→
Release <MEM> push-button and disconnect
the card from the power supply.
→
Press <MEM> and <OPEN> push-
button and switch on the card (hold
down push-button).
The RED LED lights up 3x.
R
→
Release <MEM> and <OPEN> push-
button and disconnect the card from
the power supply.
Publicité
