American Standard 7426201 Manuel Du Propriétaire page 3

INSTALLATION INSTRUCTIONS
1
INSTALL FAUCET
Turn off hot and cold water supplies
before beginning.
• Insert FAUCET SHANKS (1) through the deck.
• Thread MOUNTING NUTS (2) on to FAUCET
SHANKS (1) to secure the faucet.
Note: Deck Hole diameter must be 1" minimum.
2
INSTALL DRAINS
• Insert DRAIN SHANK (1) through the sink basin.
• Slide RUBBER GASKET (2) on to DRAIN SHANK (1)
from below the sink basin.
• Thread MOUNTING NUT (3) on to DRAIN SHANK (1)
from below the sink basin and hand tighten.
Note: To operate the drain, push down on the top to
toggle it open or closed.
3
SECURE FAUCET & MAKE WATER SUPPLY CONNECTIONS
• Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3). Use
adjustable wrench to tighten connections. Do not over
tighten. Be careful not to kink copper supply when bending.
Use tubing cutter to cut to proper length.
NOTE: Flexible supplies have to be purchased separately.
D
Remove
1
2
3
2
COUPLING NUT
3
1
2
1
FERRULE