HoMedics HHP-350-CA Mode D'emploi page 5

NOTE: There
is a 15-minute
auto shut off on
the unit for your
safety.
All manuals and user guides at all-guides.com
3. To turn the heat function on, the massager must be on. To activate the
heat function, press the HEAT
on the top of the handle (Fig. 1). To cancel the heat function, press the
HEAT button a second time.
NOTE: The heat function works best when the attachments are removed
and the red heat nodes are exposed.
NOTE: Do not use the heat continuously for more than 15 minutes. Do not
use the heat if you have sensitive skin, poor circulation, discolored areas,
swelling, burned, inflamed or where skin eruptions or sores are present.
Heat should be pleasant and comfortable. Should pain or discomfort
result, discontinue use and consult your physician.
4. Apply massager head lightly to the area you wish to massage.
5. Move the unit slowly, holding on the targeted area. Massage the area
for a short period of time and move to another area. Never massage
the same spot longer than 3 minutes. CAUTION - as stated in the
"IMPORTANT SAFETY INSTRUCTIONS" section of this manual, never
use this appliance on or near eyes or other highly sensitive areas.
6. Operation of longer than 15 minutes is not recommended and may
cause overheating.
7. When massage is completed, turn unit off, unplug the power supply,
allow to cool and store properly in a dry place.
To Change Attachments
Your massager comes equipped with four custom massage head
attachments.
A. Dark Gray - Soft massage
B. Light Gray - Firm massage
To change to a different set, simply twist off (counterclockwise) the set that
is on the unit, press in and twist on (clockwise) the desired set.
button located above the intensity bars
A.
5
B.