V2 WISANT 19-230V Mode D'emploi page 18

MAINTENANCE
Make sure the door is in good working condition and that it is correctly balanced.
The door operator should be checked and maintained by a qualified technician.
Keep operator clean at all times.
TROUBLESHOOTING
Error Cause for error
(1) Power is OFF.
(2) The door is obstructed.
The operator does not
(3) The wires become loose.
work
(4) The emergency switch was pressed.
(5) The door is too heavy.
The operator stops Thermal overload protection in
working suddenly motor is active
The door cannot be
opened or closed Wrong adjusting of limit switch
completely
PACKING LIST
After receiving the product, you should make an unpack-inspection, in which you should check whether the product was damaged. If you
have any problem please contact our sales agent. You should find the following items in our standard packing:
No. Item
1 Door operator
2 Wall bracket
3 Spacer ring and screw
4 Hexagonal wrench key
5 Key
6 Bolt (M10X20)
7 Washer
8 User's manual
All manuals and user guides at all-guides.com
Quantity
1
1
2
1
1
4
4
1
16
Solutions
(1) Make sure that power is ON.
(2) Remove obstructions.
(3) Fasten the wires.
(4) Rotate the emergency switch to ensure that the
button returns to its original position.
(5) Replace or readjust the balance springs.
Allow the motor to cool down
Readjust the limit switch