Broan Best KEX3500 Mode D'emploi page 8

INSTALL THE
HOOD
1. Hang the hood from the
bracket through the
rectangular cut-out on
the back of the hood. Cut-
out is larger than the
bracket to allow for
horizontal adjustment.
The bottom of the hood
should be 24" to 30"
above the cooking
surface.
2. Secure the hood with
mounting screws (4,8x38mm). Use drywall anchors, provided, if wall studs or
framing are not available.
INSTALL DUCT COLLAR
1. Fold the 2 tongues outwards.
2. Fix the discharge collar onto the hood; it
must be fixed either by means of 2
mounting screws (3,9x9,5mm).
All manuals and user guides at all-guides.com
MOUNTING SCREWS
(4,8x38mm)
MOUNTING
SCREWS
(4,8x38mm)
- 8 -
WALL FRAMING
MOUNTING
BRACKET
RECTANGULAR
CUTOUT
DISCHARGE
TONGUES
COLLAR