Publicité
Les langues disponibles
Les langues disponibles
8595258
2.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.
Wear protective clothing designed for the work
environment and tool.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2.
Do not overreach when operating the tool. Proper footing
and balance enables better control in
unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
WARNING! Exceeding the listed limits or not observing the
precautions listed can expose you to personal injury. It can
also permanently damage the tool, parts and circuits of the 12
volt system being tested.
1.
Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
2.
The unit is designed to test DC voltage only. Do not directly
or indirectly connect the unit to any AC voltage circuits or
AC power sources.
3.
Do not connect the unit to a circuit that exceed
42 volts DC.
4
Always follow the instructions and procedures indicated in
the vehicle's service manual before attempting to disconnect
any part of the subsystem of the electrical circuit.
4
AUTO CIRCUIT TRACER DETECTOR
For technical questions call 1-800-665-8685
V1.1
Publicité
