Publicité
Les langues disponibles
Les langues disponibles
8595258
CARE & MAINTENANCE
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
1.
Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3.
Clean the outside of the unit with a damp cloth. Never use
solvents to clean any parts of this tool. Use compressed air
to blow out debris from the unit.
4. Turn off both the sender unit and receiver unit and
remove the batteries if the tool will not be used for an
extended period.
5.
Store the unit in a cool, dry location.
6.
When the batteries have been discharged, replace the
batteries on either unit by opening the battery covers and
replacing the batteries with fresh 9v batteries.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or
by-laws for electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
10
AUTO CIRCUIT TRACER DETECTOR
For technical questions call 1-800-665-8685
V1.1
Publicité
