PRO-POINT 8595258 Manuel D'utilisateur page 2

8595258
AUTO CIRCUIT
TRACER DETECTOR
SPECIFICATIONS
DC Volt Range
Battery Details
LEDs
INTRODUCTION
The Auto Circuit Tracer Detector is designed to trace and identify
malfunctioning electrical circuits that are open or short-circuited
without damaging the insulation on wires or cables.
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic precautions
to reduce the risk of personal injury and/or damage to
the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this
manual. A notice is an alert that there is a possibility of property
damage, injury or death if certain instructions are not followed.
2
AUTO CIRCUIT TRACER DETECTOR
6 to 42 Volts DC
2 pc 9V Batteries (Not Included)
Green LED (Open Circuit)
Red LED (Shorted Circuit)
For technical questions call 1-800-665-8685
V1.1