Publicité
Les langues disponibles
Les langues disponibles
operating instructions
power cord reel instructions
(
power cord reel is for storage only
31. Unlock Power Cord reel by
pulling handle out.
Power Cord reel is
NOTE:
for storage only.
32. Put the NEMA plug inside the
power cord reel and with the
other hand turn slowly to start
to rewind the power cord.
33. Continue guiding cord back and
forth until entire cord is on the
reel.
34. Push handle in to lock reel.
12
mpx1450_en.indd 12
nozzle cleaning instructions
)
A clogged or partially clogged noz-
zle can cause a significant reduction
of water coming out of the nozzle
and cause the unit to pulsate while
spraying.
To clean out the nozzle:
‧ ∙ Turn off the unit.
‧ ∙ Turn off the water supply.
‧‧ ∙ Relieve any pressure trapped in
the hose by squeezing the trig-
ger 2 - 3 times.
‧ ∙ Separate lance from gun.
‧ ∙ Rotate nozzle to the narrow
stream setting. This opens up
the fan blades.
‧ ∙ Using the tip cleaner included,
insert it into the nozzle hole and
move back and forth until debris
is dislodged.
‧ ∙ Remove additional debris by
back-flushing
the nozzle. To do this, place end
of garden hose (with water run-
ning) to tip of nozzle pushing
water and debris out the back
opening of the lance.
inlet filter cleaning instructions
A clogged filter may cause pulsate
spraying or reduction of flow.
mpx 1450
water
through
CHECK AND
CLEAN
THE
FILTER AFTER
EVERY USE
22/02/10 09:29
Publicité
