Publicité
Les langues disponibles
Les langues disponibles
operating instructions
assembly
1. Install with supplied screws.
Tools required : 1 cross-head
screwdriver.
2. Install the wheels (see the image).
3. Install the power cord reel lever
(see the image).
important safety instructions
save these instructions
When using this product, basic
precautions should always be
followed, including the follow-
ing:
1. Read all instructions before us-
ing the product.
2. Always disconnect power before
disassembling or repairing the
unit.
mpx1450_en.indd 5
3. Follow all safety codes as well
as the Occupational Safety and
Health Act (OSHA).
4. Ensure safety devices are operat-
ing properly before each use. DO
NOT remove or modify any part
of the gun or unit.
5. Know how to stop this product
and bleed pressure quickly.
thoroughly familiar with the con-
trols.
6. Stay alert - watch what you are
doing.
7. Do not operate the product when
fatigued or under the influence
of alcohol or drugs.
8. Keep operation area clear of all
persons.
9. Do not overreach or stand on un-
stable support. Keep good foot-
ing and balance at all times.
10. Follow the maintenance instruc-
tions specified in the manual.
11. This product is provided with a
NEMA plug, be sure to inspect
cord and NEMA plug prior to use.
Any repair or replacement of the
power cord must be performed
by a qualified (licensed or certi-
fied) electrical technician.
12. NEVER USE AN ExTENSION CORD
WITH THIS PRODUCT.
13. The power cord on this pro-
duct contains chemicals, inclu-
ding lead, known to the State of
California to cause [cancer and]
birth defects or other reproduc-
tive harm. Wash hands after han-
dling.
14. To reduce the risk of injury, close
supervision is necessary when a
product is used near children.
mpx 1450
Be
5
22/02/10 09:29
Publicité
