Publicité
Les langues disponibles
Les langues disponibles
Changing Settings
Press and hold
Setting Codes: E-0 will be displayed.
(See Switch Settings chart for code explanations)
Press
Press
Press
second). Each value changes by a certain increment every time you press
(See Switch Settings chart).
Press
Don't press anything for 10 seconds to exit and save the settings.
Switch Settings
Code
E-0
E-1
E-2
E-3
E-4
E-5
14-02-038-933304.indb 5
for three seconds to enter settings mode.
F1
to cycle through the available codes.
F1
to select the code you wish to change.
F2
to adjust the value (the code and value will flash alternately every
F2
to confirm the value.
F1
Item
Delay Setting
Undervoltage Protection
Overvoltage Protection
Overload Protection
Digital Display
Restore Defaults
Settable
Default
Range
6 seconds 6-120 seconds 6 seconds
180V
120V-200V
255V
210V-270V
700W
100W-1000W
Shows output voltage or loading power value after
startup (U= voltage, P= watts)
Restores all default settings. Unit will display defaults
once confirmed, then reset and count down.
5
F2
# of
Increment
Increments
20
5V
16
5V
12
150W
7
2/19/2014 2:54:22 PM
Publicité
