Publicité
Les langues disponibles
Les langues disponibles
Installation & Operation
1) Plug switch into outlet and plug in appliances.
2) After the switch is plugged in, it will display a 6 second countdown (default)
before supplying power to your appliance and showing the voltage on the Digital
Display.
3) If the default settings aren't appropriate for your situation, you can change them
by following the procedure below.
Notes:
• We strongly recommend you use the default settings to ensure safe operation of the switch.
• It's possible to adjust the parameters at any time. Changing the delay setting requires a power cycle
for the new delay to take effect.
14-02-038-933304.indb 4
Caution: Don't use this switch with any device that needs to be
continually powered, as the switch is designed to cut power when
unstable voltages occur.
4
2/19/2014 2:54:22 PM
Publicité
