How to Brew
w WARNING
If overflow occurs, unplug and allow coffee maker to cool.
To avoid hot coffee overflowing:
• Fill reservoir with cup or travel mug of water into which the
coffee will be brewed.
• Fully insert cup or travel mug on cup rest.
• Do not lift lid during the brewing process.
• If brew process is stopped early, the water must be drained
from the unit. Place a large mug on cup rest. Press the BREW
NOW I/ button. Failure to drain the unit can cause the next cup
brewed to overflow.
w CAUTION
Removable single-serve pack holder has a sharp needle. Piercing
needle on underside of lid also is sharp. Use caution when
handling.
NOTES:
• Use only cold water in reservoir. Do not use hot water.
• Do not reheat coffee in the machine.
• Do not use creamer or nondairy creamer in reservoir.
• After brewing hot cocoa single-serve packs, brew a water-only
cycle without a single-serve pack to avoid the possibility of
clogging the piercing needle.
• Coffee maker brews all the water added.
• Press the BREW NOW I/ button again to STOP brewing
midcycle. Remaining water must be removed. See warning
statement above.
• If brew indicator light flashes three times, the lid is not closed.
Lower lid until it clicks to lock. Press BREW NOW I/ button.
• Do not brew coffee without removable needle holder locked into
place.
Burn Hazard.
Cut Hazard.
6