Adjusting The Crossover Frequency; Adjustment For Video Playback - JVC KW-V41BT Mode D'emploi

SETTINGS
❏ Adjusting the crossover frequency
1
Display the <X'over> screen.
On the Home screen:
2
Select the item to adjust (1), then make
adjustments (2).
<HPF> Adjusts the crossover for the
front/rear speakers (high pass
filter).
<LPF> Adjusts the crossover for the
subwoofer (low pass filter).*
<Level> Adjusts the subwoofer level.*
<Phase> Selects the phase for the
subwoofer.* 2
<Freq> Adjusts the crossover frequency.
* 1
Adjustable only when the subwoofer is activated. (Page 44)
2
* Not selectable when <Freq> is set to <Through>.

Adjustment for video playback

❏ Adjusting the picture
You can adjust the picture quality.
1
Display the adjustment menu.
• When the App screen is displayed, you can
press and hold DISP (for KW-V41BT)/
KW-V21BT/KW-V11) on the monitor panel to
switch to the picture adjustment menu.
2
Select [DIM ON] (dimmer on) or [DIM OFF]
(dimmer off).
1
1
3
Adjust the picture (–15 to +15).
<Bright> Adjusts the brightness.
<Contrast> Adjusts the contrast.
<Black> Adjusts the blackness.
<Color> Adjusts the color.
<Tint>* Adjusts the tint.
<Sharpness> Adjusts the sharpness.
* Adjustable only when the incoming signal is NTSC.
(for
ENGLISH 39