Other External Components; Using External Audio/Video Players-Av-In; Using A Rear View Camera - JVC KW-V41BT Mode D'emploi

OTHER EXTERNAL COMPONENTS

Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 39.
You can connect an external component to the
iPod/AV-IN terminal. (Page 52 )
Preparation:
Select [AV-IN] for <AV Input>. (Page 45)
• <AV Input> can be changed only when
<Navigation Input> is set to [OFF]. (Page 45)
❏ Indications and buttons on the source
control screen
1
Playback information
1 AV-IN name
Operation buttons
[Mode] Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN name.
❏ Starting playback
1
Connect an external component to the
iPod/AV-IN terminal.
• To connect an external component, see
page 52 .
2
Select "AV-IN" as the source. (Page 9)
3
Turn on the connected component and
start playing the source.

Using a rear view camera

• To connect a rear view camera, see page 52 .
• To use a rear view camera, a REVERSE lead
connection is required. (Page 51 )
❏ Activating the rear view camera
1
Display the <Input> setting screen.
On the Home screen:
2
To deactivate: Select [OFF] for <R-CAM Interrupt>.
❏ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
• You can change the setting of the picture using
[Zoom]/[Aspect]/[Pict Adjust]. (Page 39)
To display the picture from the rear view camera
manually
On the Home screen:
To exit the rear view screen: Press HOME on the
monitor panel.
ENGLISH 29