Braun Welch Allyn ThermoScan Pro 3000 Manuel D'utilisation page 12

12
All manuals and user guides at all-guides.com
Replacing the batteries
The thermometer is supplied with 2 lithium cells, type CR 2032/
DL 2032. Insert new batteries when the battery symbol
appears on the display.
Using the tip of a ball-point pen, press the battery door lock to open
the battery compartment.
Using your finger, press the battery release.
Remove the batteries and replace with new batteries, making sure
the poles are in the right direction.
Slide battery door back in until it snaps in place.
To protect the environment, dispose of empty batteries
at your retail store or at appropriate collections sites
according to national or local regulations.
To dispose of the thermometer, please return it to a
Welch Allyn Service Centre.
Calibration
The thermometer is initially calibrated at the time of manufacture.
If at any time you question the accuracy of measurement or the
performance of the thermometer, contact a Welch Allyn Service
Centre. To determine the date of manufacture, refer to the Lot
number located in the battery compartment. The first digit refers to
the last digit in the year of manufacture. The next two digits refer to
the calendar week in the year of manufacture.
For example: LOT 842...
This thermometer was manufactured during the 42nd week in 1998.
Product specifications
Displayed temperature range: 20 - 42.2 ºC (68 - 108 ºF)
Operating ambient temperature range: 10 - 40 º C (50 - 104 ºF)
Display resolution: 0.1 ºC or ºF
Accuracy: 35.5 - 42.0 ºC (98.0 - 107.6 ºF): ± 0.2 ºC
outside this range : ± 0.3 ºC
Battery life: 5000 measurements
Type BF equipment / Subject to change without notice.
The Braun ThermoScan PRO 3000 has been found to be immune
to electromagnetic fields and does not produce any measurable
RF emissions.
This product conforms to the provisions of the
EC directive 93/42/EEC (Medical Device Directive). 0297