Publicité
CRANKCASE AND CRANKSHAFT
4-64
EC4N3302
Crankshaft
1. Remove:
9
Crankshaft 1
Use the crankcase separating tool 2.
Crankcase separating tool:
YU-1135-A/90890-01135
NOTE:
Make appropriate bolts 3 as shown available by
yourself and attach the tool with them.
cC
Do not use a hammer to drive out the
crankshaft.
EC4N3401
Crankshaft bearing
1. Remove:
9
Bearing 1
NOTE:
9
Remove the bearing from the crankcase by
pressing its inner race as shown in å.
9
If the bearing is removed together with the
crankshaft, remove the bearing using a general
bearing puller 2 as shown in ∫.
9
Do not use the removed bearing.
EC4N4000
INSPECTION
EC4N4101
Crankcase
1. Inspect:
9
Contacting surface a
¡ Replace.
Scratches
9
Engine mounting boss b, crankcase
Cracks/Damage ¡ Replace.
ENG
Publicité
