Publicité
CYLINDER HEAD, CYLINDER AND PISTON
5. Install:
9
Gasket (power valve housing)
9
Power valve housing 1
9
Bolt (power valve housing) 2
6. Install:
9
O-ring 1
NOTE:
Apply the lithium soap base grease on the O-
rings.
7. Install:
9
Cylinder head 1
9
Copper washer 2
9
Nut (cylinder head) 3
NOTE:
Tighten the nuts (cylinder head) in stage, using a
crisscross pattern.
8. Install:
9
Engine bracket 1
9
Bolt (engine bracket) 2
9
CDI unit bracket 3
9
Engine mounting bolt (upper) 4
9. Install:
9
Spark plug 1
9
Spark plug cap 2
9
Radiator hose 2 3
4-29
ENG
5 Nm (0.5 m•kg, 3.6 ft•lb)
28 Nm (2.8 m•kg, 20 ft•lb)
34 Nm (3.4 m•kg, 24 ft•lb)
34 Nm (3.4 m•kg, 24 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)
1 Nm (0.1 m•kg, 0.7 ft•lb)
Publicité
