Publicité
CARBURETOR AND REED VALVE
4-15
7. Install:
9
Throttle cable 1
9
Mixing chamber top 2
9
Spring (throttle valve) 3
9
Ring 4
9
Throttle valve 5
NOTE:
9
While compressing the spring, connect the
throttle cable.
9
Align the projection a on the ring with the
groove b in the needle holder 6.
8. Install:
9
Mixing chamber top 1
9
Screw (mixing chamber top) 2
To carburetor 3.
NOTE:
After installing, check the throttle grip for smooth
movement.
9. Install:
9
Air vent hose 1
9
Overflow hose 2
9
Clamp 3
NOTE:
Pass the air vent hose at the rear (on the air
cleaner side) of the throttle cable 4.
EC465352
Carburetor installation
1. Install:
9
Carburetor 1
NOTE:
Install the projection between the carburetor joint
slots.
ENG
Publicité
