Royal Sovereign RBC-4500-CA Guide De L'utilisateur page 10

4.DATE&TIME
Press RESET∙ENTER key and enter the contents, it displays "YYYY-MM-DD HH:MM:SS", press number keys and set the
date and time, press " , " key and select the set item, then press RESET∙ENTER key and quit.
5.BEEP
Press RESET∙ENTER key and set, it display ➀. KEY BEEP OFF ➁. KEY BEEP ON ➂. WARNING BEEP OFF ➃. WARNING
BEEP ON. press " , " key and select the set item, then press RESET∙ENTER key and quit.
Note: Defaulted to KEY BEEP ON, WARNING BEEP ON.
6.PRINTER INTERFACE
Press RESET∙ENTER key and enter the contents, ➀.4800bps ➁. 9600bps ➂.14400bps ➃. 19200bps ⑤. 28800bps
⑥. 57600bps, press " , " key and select the set item, then press RESET∙ENTER key and quit.
7.LANGUAGE
Allows user to select between English and French
3. Test Run
The unit is defaulted to count Canadian Polymer and Paper bills. It is recommended that you test the unit before operation.
Test the machine to set it to count your currency. Prepare at least five bills to test the machine. Place the bills on the hopper
and run the machine. If the machine counts the bills and there are no errors, it is ready to accept your currency.
If: 1. The bills are deformed
2. The machine is considerably slow
3. Error message is lit frequently
The hopper tension is too tight. To loosen this tension, please turn the Bill Thickness Adjuster one notch to the right (+).
Place the bills back into the hopper to test the machine again. If errors occur, adjust as necessary.
If: 1. The bills are flying out
2. The display shows a miscount
3. Error message is lit frequently
The hopper tension is too loose. To tighten this tension, please turn the Bill Thickness Adjuster one notch to the left (-).
Place the bills back into the hopper to test the machine again. If errors occur, adjust as necessary. When the machine is
running without any errors, it is ready to accept your currency. Insert bills into the hopper to begin counting.
4. Add Mode:
Press ADD key and "ADD" will show in display. The machine will accumulate all counting numbers. Pressing ADD key again
will turn off this feature.
All manuals and user guides at all-guides.com
10