VMI VISION'R VENTILAIRSEC CUBE Notice page 74

If you are unable to scan the bar code using your camera,
•
you can also enter the machine identifier manually (figure
under the bar code).
Press the CONFIRM button.
•
Step 4: Modify preheating settings
Select the CONFIGURATION button and then SIMPLIFIED CONFIGURATION.
•
You can decide to either turn preheating ON/OFF or change the preheating temperature.
•
Step 3: Machine identifier
• Click on the "camera" icon to scan your VMI
can scan:
o either the QR code located
inside the control unit battery
recess
o or the VMI unit bar code located on the side of the housing or in
®
the hard copy manual included in the VMI
unit identifier. You
®
CUBE box.
®
74