VMI VISION'R VENTILAIRSEC CUBE Notice page 66

Step 1
• Open the VMI+ application.
• Select the VMI
Step 2
PAIR
• A VMI ® CUBE pairing page will open.
PAIR
• Select the VMI
methods are available:
PAIR
PAIR
o Press the
PAIR
PAIR
o If you cannot see the halo, place the smartphone as near
• Click on the PAIR button for the VMI identified.
CUBE button.
®
CUBE to be configured. Two identification
®
icon. The VMI light halo will flash in green
for a few seconds visually indicating which VMI CUBE is
ready for configuration.
to the VMI unit as possible. Press the SCAN button on the
VMI+ application and the VMI to be configured
corresponds to the unit with the number closest to 100.
66