Connecting your equipment
2
Connect the CONTROL OUT jack of that
component to the CONTROL IN jack of
another Pioneer component.
Use a cable with a mono mini-plug on each
end for the connection.
HDMI
BD IN
IN
1
IN
2
1 4
ASSIGNABLE
COMPONENT VIDEO
AUDIO
ASSIGNABLE
IN
1
IN
2
( DVD )
( DVR/BDR )
L
Y
Y
P
P
R
B
B
ZONE 2
DVR/BDR
OUT
OUT
P
P
R
R
MONITOR
OUT
Y
VIDEO
P
B
P
R
VSX-1025
IN
OUT
CONTROL
Continue the chain in the same way for as
many components as you have.
Note
1 After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You
cannot carry out any operations during this process. The HDMI indicator in the front panel display blinks during this
process, and you can turn on this receiver once it has stopped blinking. When you set the Control to OFF, you can
skip this process. For details about the Control with HDMI feature, see Control with HDMI function on page 65.
IN
3
IN
4
OUT
DVD
TV/SAT
VIDEO
IN
IN
IN
IN
IR
CONTROL
IN
OUT
IN
OUT
IN
OUT
CONTROL
Plugging in the receiver
Only plug in after you have connected all your
components to this receiver, including the
speakers.
•
Plug the AC power cord into a
convenient AC power outlet.
CAUTION
• Handle the power cord by the plug part.
Do not pull out the plug by tugging the
cord, and never touch the power cord
when your hands are wet, as this could
cause a short circuit or electric shock. Do
not place the unit, a piece of furniture, or
other object on the power cord or pinch
the cord in any other way. Never make a
knot in the cord or tie it with other cables.
The power cords should be routed so that
they are not likely to be stepped on. A
damaged power cord can cause a fire or
give you an electric shock. Check the
power cord once in a while. If you find it
damaged, ask your nearest Pioneer
authorized independent service company
for a replacement.
• The receiver should be disconnected by
removing the mains plug from the wall
socket when not in regular use, e.g., when
on vacation.
03
1
39
En