Pioneer VSX-1025 Mode D'emploi page 10

02 Controls and displays
iPod/iPhone – Lights to indicate iPod/
iPhone is connected (page 46).
8 Tuner controls
BAND – Switches between AM and FM
radio bands (page 51).
TUNER EDIT – Use with TUNE /,
PRESET / and ENTER to memorize and
name stations for recall (page 51).
TUNE / – Find radio frequencies
(page 51).
PRESET / – Find preset stations
(page 51).
9 MASTER VOLUME dial
10 PHONES jack
Connect the headphones. When the
headphones are connected, there is no sound
output from the speakers.
11 Listening mode buttons
AUTO/ALC/DIRECT – Switches between
Auto Surround (page 59), Auto Level
Control mode and Stream Direct mode
(page 62).
STEREO – Switches between stereo
playback and Front Stage Surround
Advance modes (page 62).
STANDARD – Press for Standard decoding
and to switch between the various 2 Pro
Logic IIx and Neo:6 options (page 59).
ADV SURROUND – Switch between the
various surround modes (page 61).
12 iPod iPhone DIRECT CONTROL
Change the receiver's input to the iPod and
enable iPod operations on the iPod (page 47).
13 MCACC SETUP MIC jack
Connect the supplied microphone (page 40).
14 iPod/iPhone/USB terminals
Connect your Apple iPod as an audio and video
source, or connect a USB device for audio and
photo playback (page 36, 37).
10
En
15 VSX-1025 only: HDMI input connector
Use for connection to compatible HDMI device
(Video camera, etc.)(page 35).
16 VSX-925 only: VIDEO 2 INPUT terminals
Use to connect your portable equipment such
as camcorders, video games and portable
audio/video equipment (page 35).