BaByliss PRO FX7880E Mode D'emploi page 6

ENGLISH
Please carefully read the
safety instructions before
using the appliance.
Adaptor
Vibrations
LpA (dB(A))
EDM TECHNOLOGY
PROFESSIONAL
TRIMMER
FX7880E
This heavy-duty trimmer features
a choice of 2 interchangeable
Japanese steel blades with zero
gap adjustment for precision and
control. Long-life lithium bat-
tery and super-fast charging gua-
rantees sustained performance for
the ultimate in precision detailing.
A high torque digital motor deli-
vers high power performance for
clean, close cutting.
FEATURES
• High power cord or cordless control
• Precision engineered Japanese
steel blades with super sharp V cut-
ting angle
• Interchangeable 30mm ("U") and
40mm ("T") zero gap adjustable
cutting blades
• Lithium technology for sustained
power performance
CA80M
<2.5 m/s²
< 70
• High-torque digital motor for long-
lasting power and speed
• Absolutely balanced for superior
handling
• 6mm and 10mm comb guides
• Robust all metal housing design
• Charging and storage stand
• Oil and cleaning brush
INSTRUCTIONS FOR USE
• Charging the appliance - Before
using the appliance for the first
time, charge the battery conti-
nuously for 3 hours. Maximum
battery capacity will only be rea-
ched after 3 completed charging
and discharging cycles.
• Plug the charging adapter into a
suitable mains power socket. The
red LED indicator light will flash
when correctly connected to the
mains power and will continuous-
ly flash until the battery has fully
charged. When the battery is fully
charged the LED indicator light
will stop flashing but remain on.
NOTE: Always place the trimmer in
the base with the 'I/0' switch in the
OFF (0) position.
• When the clipper is running low
on charge, the LED indicator light
will flash, warning there is approxi-
mately 3 minutes of battery use
remaining. A 3 hour charge will
provide approximately 2 hours
use. A 30 minute quick charge will
provide approximately 30 minutes
use.
• If the charging light starts to flash
rapidly (more than 4 flashes per se-
cond) then the appliance is faulty.
If this happens then please stop
charging and remove the adapter
from the mains and contact the
6