3. FUNCTION OF THE MONEY DETECTOR BUTTONS
CUR/DIR: This button enables you to select the currency of the notes you wish to verify (short
press) and to change the direction of the validation (long press).
To change currencies, short press the button: from EUR to GBP, from GBP to USD or from USD
to EUR.
To choose the exit direction of banknotes, hold down the button for 3 seconds until you hear a
beep: the indicator arrow at the top right of the screen will change direction.
If the arrow is pointing upwards ( ) your genuine banknotes will exit via the top of the detector
and the counterfeit notes will come towards you.
If the arrow is pointing downwards ( ) your genuine banknotes will come towards you and
counterfeit notes will exit via the top of the detector.
CAUTION!! To ensure an optimal detection of your banknotes, remember to place your note
on the right side of the hopper.
Hold the button for about 2 seconds to clear the records.
When you've finished running banknotes, press "REP/CLR" to enter report mode. In report mode,
each click of the "REP/CLR" button will show a tally for the number of bills of each denomination
that have been run through the machine. When you've finished checking the record, the detector
will automatically exit report mode when you feed another banknote into the machine.
REP/CLR: This button enables you to check the number of notes of each denomination that you
have verified (short press) and to delete these records (long press).
Short press the button to change the display to see the number of notes of each denomination:
the central space then shows the details of each previous denomination, and the total amount is
always displayed at the bottom right of the screen.
You can check your banknotes with this display, the number of denominations will increase
automatically.
Hold down the button for 3 seconds until you hear a beep to reset the notes counted to 0.
This reset works with the note count display (default screen) and with the denomination details
display.
6
EN