Zenacasa AL-130 Manuel D'instructions page 5

MONEY DETECTOR OPERATION AND FUNCTION
1. POWER SUPPLY
DC Power: Connect the power adapter to a 110V or 220V outlet, then connect the terminal
to the machine's DC12V input socket.
LIthium Battery (optional): When the battery is fully charged, the machine can work without
a power adapter.
2. TURNING THE MACHINE ON/OFF, AND STANDBY MODE
To turn on the machine, press the "ON/OFF" button: The Power indicator will light up blue and
the machine will start self-testing.
The display screen will show the software version then the detection information: the currency
at the top left (EUR, GBP or USD, the 3 tests (UV, MG and IR), the direction of note validation
( or ) and the battery level. The 0 in the centre of the screen shows the number of notes
counted. The 0 at the bottom of the screen shows the total amount verified. The detector is ready
to use.
To turn off the machine, press the "ON/OFF" button for around 2 seconds until you hear a beep,
then release the button. When the power button and the screen switch off, your detector is
turned off.
The detector goes into standby mode after 3 minutes without use: the screen turns off and only
the blue light of the ON/OFF button will stay lit.
The device can be brought out of standby mode by pressing any button or by inserting a note
into the hopper.
If the machine is inactive again for more than 5 minutes, it will automatically turn itself off.
5
EN