Zenacasa AL-130 Manuel D'instructions page 11

IMPORTANT NOTICES
If the machine shows errors or works abnormally, check the following things:
• The main power supply is within the specified range (AC 100V-240V/50-60Hz).
• The DC output is within the specified range: DC 12V+5%.
• The power cable is plugged in correctly.
• The built-in battery is sufficiently charged for use.
• There is no dust on the sensors.
• You have performed the recalibration procedure.
If a banknote becomes stuck while it is being detected, open the top cover and remove
the banknote to detect it again.
Smooth out each banknote before detection. Each banknote must be placed straight and flush
to the right-hand side of the hopper during insertion.
11
EN