Samsung DVD-VR330 Manuel D'instructions page 18

❚
Case 2 : Connecting DVD Recorder &
VCR to a Satellite Receiver or
Other Equipment
You can connect your DVD Recorder & VCR to a
Satellite receiver or other DVD Recorder & VCR using
the SCART cable if the appropriate outputs are
available on the equipment chosen.
The following illustrations give a few examples of the
connection possibilities.
AV2 IN (EXT): By means of 21-pin Scart Cable
1
Plug the SCART Cable with satellite receiver or
other equipment into the AV1(TV) jack on the rear
of the DVD Recorder & VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV2 input
sources.
AV1 (TV) : By means of 21-pin Scart Cable
2
Connect the end of the SCART cable to the AV1
(TV) jack on the rear of the DVD Recorder & VCR.
Plug the other end into the appropriate
connector on the television.
18 - English
Connecting the
Audio/Video Cable
You can connect your DVD Recorder & VCR to the
television using the audio/video cable if the
appropriate input is available on the television.
1 Connect one end of the video cable into the
VIDEO output jack on the rear of the DVD
Recorder & VCR.
2 Plug the other end of the video cable into the
appropriate input connector on the television.
3 Connect one end of the audio cables supplied into
the AUDIO output jacks on the rear of the DVD
Recorder & VCR.
• Take care to respect the colour coding of the
left and right channels.
Plug the other end of the audio cables into the
4
appropriate input connectors on the television.