Thermador DWHD560CFP Manuel D'utilisation Et D'entretien page 12

Notes
To remotely control the dishwasher, the remote start
▯
button ` must be activated.
The remote start button
▯
process is complete.
Opening the door deactivates remote control.
▯
If the connection to the router fails,
▯
display.
Wi-Fi without a connection to the Home
Connect server ƒ
You can use the Home Connect App to disconnect from
the Home Connect server.
The appliance is then locally connected to your mobile
device without any connection to the Home Connect
server.
Note: If you did not deactivate the connection to the
Home Connect server, check your Internet connection.
Remote diagnostics
Customer Service can use remote diagnostics to access
your appliance if you contact them. In the display window
you will see . Confirm Customer Service access
H '†
using the setting button +
Note: You can switch off remote diagnostics using the
ON/OFF switch or deactivate Customer Service
(
access in the Home Connect app.
System Updates
Periodically, the Home Connect system will perform an
update. The letters UP will appear in the display window.
Do not run a cycle during the update process. When it is
complete, SUC (for success) will appear in the display
window, and you can use your dishwasher again.
12
goes out when the login
`
flashes on the
|
W i - F i w i t h o u t a c o n n e c t i o n t o t h e H o m e C o n n e c t s e r v e r
.
P