Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
COUNTERWEIGHT FOR MTD TRACTORS 2000 SERIES
a) Set the parking brake and remove the ignition key.
b) Insert the right support plate (item 1) & left support plate (item 2) on the tractor frame as shown. Secure
each side with the two 1/2'' x 1'' hex bolts (item 3) and two flat washers 9/16'' (item 4). Do not tighten right
now.
c) Slide the support flat bar (item 5) in the vertical slots on the support plates.
d) Place the six weights (item 6) between the support plates and secure in place by inserting the pin (item 7)
through the support plates and through the weights. Lock in place with the a hair pin 4mm (item 8) on each
side.
e) Tighten all bolts and nuts securely.
POUR ENSEMBLE / FOR KIT
700623
#700623
INSTRUCTIONS
Instructions
L-12
Publicité
Manuels Connexes pour Bercomac 2000 Serie
Sommaire des Matières pour Bercomac 2000 Serie
- Page 1 Instructions COUNTERWEIGHT FOR MTD TRACTORS 2000 SERIES #700623 INSTRUCTIONS a) Set the parking brake and remove the ignition key. b) Insert the right support plate (item 1) & left support plate (item 2) on the tractor frame as shown. Secure each side with the two 1/2’’...
- Page 2 Instructions CONTREPOIDS POUR TRACTEURS MTD SÉRIE 2000 #700623 INSTRUCTIONS a) Mettre le frein de stationnement et enlever la clé de contact. b) Insérer la plaque de support droite (item 1) & la plaque de support gauche (item 2) sur le châssis du tracteur tel qu’illustré.