Auto On/Off; Day Off Adjustment - Expobar G10 Mode D'emploi

• Aditional capabilities in machines with display
•
Adjust the hour: while the hour is blinking, increase or decrease
its value by pressing "+" (one short espresso) or "-" (one long
espresso). When the right value is reached, accept it by pressing
"OK" (two short espressos). Then it begins with the minutes
adjusting.
•
While the minutes are blinking, we can increase or decrease its value by pressing "+" (one short
espresso) or "-" (one long espresso). When the right value is reached, accept it by pressing "OK"
(two short espressos). Then the day of the week can be adjusted in the very same way ("+", "-" &
"OK").
After having adjusted all previous values, when pressing "OK" (two short espressos) the "Auto On" / "Auto Off"
menus are shown.

19.4. Auto On/off

After accepting the adjusting made in the time & day by pressing "OK" (two short coffees), we enter in the
programming of the automatic connection and disconnection of the machine.
•
As to modify the time at which the machine automatically gets into
the "ON" status: While the hour is blinking, , increase or decrease
its value by pressing "+" (one short espresso) or "-" (one long
espresso). When the right value is reached, accept it by pressing
"OK" (two short espressos). Then the minutes will blink, and will
be adjustable in the same way than the hour ("+", "-" & "Ok").
•
Note: By default, this first value will be: On: - - : - - this means that the function is disabled. As soon
as we modify the value, and it become different from - - : - - the function will be enabled. If we
prefer to leave this function disabled, just accept by pressing "OK" while the adjusted value is - - : - -
.
•
Now, while the auto-disconnection time blinks, increase or
decrease its value by pressing "+" (one short espresso) or "-" (one
long espresso). When the right value is reached, accept it by
pressing "OK" (two short espressos). Then the minutes will blink,
and will be adjustable in the same way than the hour ("+", "-" &
"Ok"). With this final acceptance, we will proceed to the next adjusting menu.

19.5. Day Off adjustment

If automatic On and Off times have been assigned, a day off can be enabled in which the machine will not
switch on: the day off.
Note that if the function of Auto On/Off was not enabled, this menu will not
appear.
To adjust the day Off, press "+" (one short espresso) or "-" (one long
espressos, as needed, till reaching the desired value; then accept it by
pressing "OK" (two short espressos).
•
Note: By default, this setting will be: - - : - - this means that the function is disabled. As soon as we
modify the value, and it become different from - - : - - the function will be enabled. If we prefer to
leave this function disabled, just accept by pressing "OK"(two short espressos) while the adjusted
value is - - : - -
English 20
Clock adjust
Hh:mm Day
Auto On/Off
On: hh:mm
Auto On/Off
Off: hh:mm
Closed on
Day