Publicité
Les langues disponibles
Les langues disponibles
Programme Mode
Selection of the week
After you have selected the programme mode, you can press the „P" key on the control panel to set the week from
Monday to Sunday. Press „+" or „-" to select another day. An
appears on the day you have selected. Press „P"
again to confirm the selection.
GB
Time setting
If you press „P" again to confirm the selection of the day, the time is set automatically. The „Hour" position flas-
hes, you can set the hour by pressing „+" and „-". Each time is adjusted by one hour.
Press „P" again to confirm the hour, at the same time the automatic setting of the minute is activated. The „Mi-
nute" position flashes, you can push through and set the minutes with „+" and „-". Each time is adjusted by one
minute.
Setting the working mode for each hour
After finishing the time setting, press the „P" key again to set a weekly or 24-hour programme.
Press the „Mode" key to select different modes, press the „+" and „-" keys to select different hours. Press the
„Mode" button for three seconds to access the „P1", „P2", „P3" and „P4" modes and press the „+" and „-" buttons to
select. Each symbol corresponds to the respective working
mode as shown below:
When you have finished selecting the working mode, press
„P" to confirm and at the same time the next hour mode
is set.
After setting the working mode of each hour for one day,
you can press „P" again to confirm and set the working
mode for the second and third day.... When you have finis-
hed setting the working mode for a week, press „P" again
to return to the current working mode and the heater will
start working according to the programme you have set.
Open window detection
Continusly pressing the "+" "-" keys at the same time for 3 seconds, open window function
will be actived.
If the heater detected the room temperature drops 4°C within 30 minutes, then the heater will work under
Anti Frost mode.
The heater will recover working under previous working program automatically if the temperature reco-
vers 2°C, or by continusly pressing the "+" "-" keys at the same time for 3 seconds again.
44
Publicité
