Geberit ACO 203XL Manuel D'utilisation page 38

EN
Cleaning and lubricating the
Geberit pressing tool
WARNING
Risk of injury from switching on
inadvertently
▶ Remove the rechargeable
battery before starting any
maintenance work on the
pressing tool.
ATTENTION
Damage to the device from moisture
▶ Never clean the pressing tool with
water or other liquids.
1
Push in both release buttons on the
rechargeable battery and pull it out.
2
Clean the roller drive, roller drive
guide and retaining pin of the
pressing tool.
3
Use a brush to remove dirt.
38
CAUTION
Harmful substances
▶ Observe the safety notes of
the lubricant used.
4
Lubricate the roller drive, roller drive
guide and retaining pin with
BRUNOX® Turbo-Spray®.
5
Wipe away excess lubricant using an
absorbent cloth.
72057595945234187 © 07-2022
968.240.00.0(03)