Publicité
Les langues disponibles
Les langues disponibles
ON/OFF
Turns the unit on or off.
TEMP
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
SET
Scrolls through operation
functions as follows:
Fresh(
)
Sleep(
)
Follow Me(
)
AP mode(
)
Fresh...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
TEMP
Decreases temperature
in 1 C(1 F) increments.
O
O
Min. temperature is
16 C(60 F).
O
O
FAN SPEED
Selects fan speeds in the
following order: AU
20%
40%
60%
80% 100%.
Press the TEMP
or
button
to increase/decrease the fan
speed in 1% increments.
SWING
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
RG10A2(F2S/H2S/G2S)/BGEFU1
Model:
RG10A10(F2S/G2S/H2S)/BGEF(20-28 C/68-82 F)
RG10A(F2S/H2S/G2S)/BGEF, RG10A(F2S/H2S/G2S)/BGEFU1 (Fresh feature is not available)
RG10A2(F2S/H2S/G2S)/BGCEFU1, RG10A2(F2S/H2S/G2S)/BGCEF(Cooling only models,
AUTO mode and HEAT mode are not available)
Note: Not used in MUPR-H10X series
&
MODE
Scrolls through operation modes
as follows: AUTO COOL
DRY HEAT FAN
ECO/GEAR
Press this button to enter the
energy efficient moce in a
sequence of following:
ECO
GEAR(50%)
mode
OK
Used to confirm the selected
functions
TIMER
Set timer to turn unit on or off
BREEZE AWAY
This feature avoids direct air flow
blowing on the body and makes
you feel indulging in silky coolness.
NTOE: This feature is available
under cool, Fan and Dry mode only
CLEAN
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER'S OPERATION &
INSTALLATION MANUAL).
LED
Turns indoor unit's LED display and
air conditioner buzzer on and off
which create a comfortable
and quiet environment.
Turbo
Enables unit to reach preset
temperature in shortest
possible time
O
O
103
GEAR(75%)
Previous setting
ECO ......
Publicité
