Télécharger Imprimer la page

STERWINS 500 CDW-3 Notice De Montage, Utilisation Et Entretien page 182

Pompe d'evacuation 2 en 1

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
FR
FR
Problems
ES
ES
The pump is not
PT
PT
stopping
IT
IT
EL
EL
The flow is not
suitable
PL
PL
RU
RU
The pump
KZ
KZ
stops for a brief
moment
UA
UA
RO
RO
8.5 FATAL CIRCUMSTANCES
EN
EN
Power consumption too high
Performance reduced
Leakage of the motor housing
9. END OF LIFE
Electrical products should not be discarded with household products. Used electrical products
must be collected separately and disposed of at collection points provided for this purpose.
Talk with your local authorities or dealer for advice on recycling.
10. WARRANTY
10.1 OUR WARRANTY
STERWINS products are designed according to the highest quality standards for products intended for
the consumer market. This sale warranty covers a period of 3 years as of the date of purchase of the
product. This warranty covers all defects in materials and workmanship: missing parts and elements,
and damage occurring under normal use circumstances. Repair and replacement of parts do not lead
to an extension of the initial warranty period. You must be able to provide proof of the purchase for this
product and the date of purchase. Warranty coverage is limited to the value of this product.
Probable causes
- The floater is blocked in
the high position
- The floater mechanism is
blocked.
- The draining pipe diameter
is not suitable
- The intake pipe is clogged
- The outlet pipe is clogged
- The turbine is blocked
- Use instructions have not
been followed
- The motor automatically
switches to safety position
- The pipe is not suitable
- The water is too hot. The
overheat protection device
is stopping the pump
Problems
Solutions
- Check there is no foreign
object which could block the
floater and put the floater back
in low position
- Shake the floater
- Replace the tube (40mm hose
is recommended)
- Clean the pipe or intake pipe
- Disassemble the base and
clean the turbine
- Check for the depth of
submersion.
- Replace the pipe following
use instructions
- Check that the water
temperature remains under
35°C.
Stop use and contact authorized service center
Сontact authorized service center
Stop use and contact authorized service center
182
18
Qualification
required
No qualification
required
No qualification
required
No qualification
required
Action

Publicité

loading