Automatic Shutdown; Slide Show - Bresser 88-54200 Mode D'emploi

5.6 TV Output
Connect the scanner to the TV with
TV cable.
NTSC: Setting the TV Output to
NTSC
PAL: Setting the TV Output to PAL
5.7 Format
Select Format and press OK button
to confi rm. Select '√' , press OK
button to format. Select 'X' and press
OK button to abort.
Caution: Formatted fi les cannot be
recovered.

5.8 Automatic Shutdown

Select Automatic Shutdown, press
OK button to confi rm.
5MIN: Set the microscope to power
off automatically in approximately 5
minutes.
'X': Do not use this function.
26
5.9 Exit
Select Exit to exit SETUP and back
to Function menu.
6. Playback
Turn on the microscope. Press the
Playback button and you will see
some pictures on the screen.
Then press the POWER button to play-
back mode. You will see the icons on
the screen as shown. Press the Left or
Right buttons to select one function.
6.1 Single
When you select the icon, press OK
button to confi rm. You need press
Left or Right button to review the
previous or next picture. Press the
POWER button to go back to the
Playback mode.

6.2 Slide Show

Select the Slide Show Mode and
press OK button to confi rm. The
microscope will automatically play
the photos continuously. Press any
button to stop the slide show. Press
the POWER button to go back to the
Playback mode.