BH FITNESS S1Xi Guide D'utilisation page 23

STEP 10
Connect two Pulse Sensor Wires (5) with Computer Pulse wires (131). Next connect Computer
Upper Cable (1) with computer cable (104). Now slide Computer (103) onto Front Post (87)
and secure with 4* Philips Screws (125). Make sure to tuck the wires into the Front Post (87)
so as not to pinch the wires.
STEP 11
Insert the Left Handlebar (93) into the Left Swing Bar and fasten with 2 sets Carriage Screws (123)
and Allen Screws (124). Follow the same procedure to assemble the Right Swing Handlebar (96).
93
96
124x4
123x4
23